I2M TPMS system kit (for 8.5mm valve)

I2M TPMS system kit (for 8.5mm valve)

Always keep track of the pressure and tire temperature of your riders in one click

(This set is especially handy if you want to be able to check the tyre pressure / rim temperature of your bike(s) in the pitbox on or the grid, with the help of a laptop.

The TPMS system allows to monitor, through a 433MHZ USB receiver, the internal pressure and the rim temperature of 24 different tyres. Through Danas (free software) it is possible to configure minimum and maximum temperature / pressure alarms so that you immediately have the status of the tires in your box, without moving from your position. With the TPMS/Can (not included) it is possible to log the informations also with any Can-logger or with the I2M Chrome Lite/Plus.

The compact receiver (86mm x 70mm x 12mm) can be connected to both Windows and Mac systems as it is based on the classic FTDI chip. Thanks to its antenna it is able to read the state of the tires at a distance of 8-10m thus covering the classic size of an entire box.

The TPMS Kit is supplied complete with two sensors and relative valves adaptors as sensor support (valves not included). Valves adaptors in this kit are 8.5mm, but are also available in 11.5mm. It is then possible to purchase the single sensor to increase the number of tires to be monitored. The sensors have one degree resolution for the rim temperature and 0.01 bar for the internal pressure.

Through the special dialog in Danas it is possible to monitor 24 different tires. For each of them it is possible to associate the ID of the sensor with a name and define if it is a front or a rear. The list therefore remains available for subsequent uses. Danas allows to configure the minimum and maximum pressure and temperature alarms for both the front and rear. The data is colored blue or red to indicate the exceeding of the thresholds, in one verse or another. The status of the battery is also indicated for each sensor.