Ships within 24 hours
Pros and cons
- Lighter weight than original
- Also used in WSSP
- Official GYTR Pro-Shop and Yamaha WorldSBK/SSP supported team
- Additional parts needed! (see description)
Product description
Mectronik 2022 wire harness kit YZF-R6 17>
(Please contact us for delivery times on Mectronik parts.)
2022 Mectronik wire harness set for the YZF-R6 17>. This wire harness is lighter than the original version and is packed with only the essentials for track use.
This wire harness is only to be used with the Mectronik STK/SSP ECU. As Mectronik uses ECU's with different specs, please contact us to check if your ECU can be used with this harness.
STRONGLY ADVISED TO BE USED WITH:
- MANDATORY: ABS to digital speed transformer (p/n: IN_ABS_SPEED_2C)
- MANDATORY: 1x fuel pump relay (p/n: CA1A-12V-A-5)
- TKRP rectifier bracket (p/n: 48-180402).
- Cordona TKRP load cell (p/n: 428-GP-ASG-TKRP).
- Wiring loom for load cell (p/n: KT136-HM).
- Correct length gear shift rod (depends on your footrest set).
- TKRP button switch left for Mectronik (p/n: BD_SW_3B_SP221).
- TKRP buton switch right for Mectronik (p/n: BD_SW_3B_12).
- TKRP single on/off button switch (p/n: BD_SW_1BX_B1T).
- Lambda sensor wide band (p/n: 48-180620).
- Can cable type L - Easy version (p/n: ACC_CAN_L).
This wire harness is also being used in the FIM WorldSSP class.
Can also be used with the I2M dashboard.
(Photo is previous spec wire harness, therefore it might differ from the actual product)